Flanges are male and female to allow a tight connection. Inside the end of each flange neck, there is a recess to allow a 5 inch outside diameter pipe to… read more →

Flanges are male and female to allow a tight connection. Inside the end of each flange neck, there is a recess to allow a 4 inch outside diameter pipe to… read more →

180 degree bend [2 inch] [stainless steel] CLR=65mm (tighter radius)

90 degree bend [2 inch] [stainless steel] CLR=65mm (tighter radius – no swaged end)

Stainless 41mm (1.5″) Single Bolt Clamp. Fits a 41mm pipe or the swaged end of a 38mm pipe.

Galvanised 64mm U clamp [2.5 inch]. Fits a 63.5mm diameter pipe or swaged end of a 60mm pipe.

Single bolt clamp [2.75 inch] [stainless steel]. Fits the male end of a 70mm pipe.

Supplied in a bag of 6 to make a 90 degree bend (6 x 15°) Each bend has a tooth/groove system to form a variety of pipe paths. Dia =… read more →

Flanges are male and female to allow a tight connection. Inside the end of each flange neck, there is a recess to allow a 2 inch outside diameter pipe to… read more →

Flanges are male and female to allow a tight connection. Inside the end of each flange neck, there is a recess to allow a 3.5 inch outside diameter pipe to… read more →

Y-Piece for Tailpipe Fitting [2.5 inch] [stainless steel] 2.5″ (63.5mm) in / 2 x 2.5″ (63.5mm) out (wider centre to centre) – Use with 100mm tailpipes U276300

Y-Piece for Tailpipe Fitting [2.5 inch] [stainless steel] 2.5″ (63.5mm) in / 2 x 2″ (50.8mm) out – use with 80mm tailpipes U275120

Y-Piece for Tailpipe Fitting [2.5 inch] [stainless steel] 2.5″ (63.5mm) in / 2 x 2.5″ (63.5mm) out – use with 90mm tailpipes U276310

Round Brushed Tailpipe [2.5 inch] [stainless steel] – Tip Dia=90mm / L=170mm

Round Brushed Tailpipe [2 inch] [stainless steel] – Tip Dia=80mm / L=155mm