Supplied in a bag of 6 to make a 90° bend (6 x 15°) Each bend has a teeth/groove system to form a variety of pipe paths. Dia = 89mm… read more →

Supplied in a bag of 6 to make a 90° bend (6 x 15°) Each bend has a tooth/groove system to form a variety of pipe paths. Dia = 76mm… read more →

Supplied in a bag of 6 to make a 90 degree bend (6 x 15°) Each bend has a t00th/groove system to form a variety of pipe paths. Dia =… read more →

Supplied in a bag of 6 to make a 90 degree bend (6 x 15°) Each bend has a tooth/groove system to form a variety of pipe paths. Dia =… read more →

Supplied in a bag of 6 to make a 90 degree bend (6 x 15°) Each bend has a teeth/groove system to form a variety of pipe paths. Dia =… read more →

Supplied in a bag of 6 to make a 90 degree bend (6 x 15°) Each bend has a tooth/groove system to form a variety of pipe paths. Dia =… read more →

Supplied in a bag of 6 to make a 90 degree bend (6 x 15°) Each bend has a teeth/groove system to form a variety of pipe paths. Dia =… read more →

Supplied in a bag of 6 to make a 90 degree bend (6 x 15°) Each bend has a tooth/groove system to form a variety of pipe paths. Dia =… read more →

Stainless | 2.75 inch / 71 mm | Braided Exhaust Flex | L=7 inch/180mm

Stainless | 3.5 inch / 89 mm | SOFT Braided Exhaust Flex | L=4 inch/101.6mm

Galvanised bracket can be bolted to floor panel to provide a hanging point 10mm bolt hole Hook length (A) = 63mm Hook depth (B) = 15mm Hook width = 25mm… read more →

Compensator [1.75 inch] [aluminised steel] L=200mm

Female slotted end 45mm inside diameter.

Male end 54mm outside diameter.

Stainless | 60.3mm | Braided Exhaust Flex | L=8 inch/203mm

Stepped adaptor [3 inch] [stainless steel] 76-65mm | L=115mm

Galvanised U clamp [2.5 inch]. Fits a 63.5mm diameter pipe (or swaged end of a 60mm pipe)